GLODAPv3 Adjustments

Stations:	[1-last]
The selected Calculated Carbon Parameter has been dismissed in October 2017! Legacy values will be exported as is and displayed in red with subscript "c", e.g. -0.123456_c! No data available? Insert -999 No suggestion for adjustment possible? Insert -888 To calibrate CTDsal use: CTDsal_calibrated = (CTDsal - CTDsal_intercept) / CTDsal_slope To calibrate CTDoxy use: CTDoxy_calibrated = (CTDoxy - CTDoxy_intercept) / CTDoxy_slope
Insert your commit message below explaining your change(s) before you save…
Salinity [+]
CTD-Sal. [+] slope \| intercept \| action [ID]	/ - #
TCO₂ [+]
Alkalinity [+]
Nitrate [x]
Phosphate [x]
Silicate [x]
Oxygen [x]
CTD-Oxyg. [x] slope \| intercept \| action [ID]	/ - #
Temp. [+]
CFC12 [x]
CFC11 [x]
CFC113 [x]
CCl4 [x]
C13 [+]
SF6 [x]

Cruise Info

Annotations for this cruise:

View 0 annotation(s) (Lists all annotations)

Files for Adjustment Plot files re. Cruise: - no files! -

Data files re. Cruise: - no files! -

Plot/Data files re. Parameter(s) (select parameter on left side to view!):
alkalinity:3 nitrate:4 oxygen:4 salinity:4 tco2:4

Plot files re. Cluster: - no files! -

Annotations re. this cruise/adjustment in GLODAPv3

View 39 annotation(s) (Lists all annotations)

GLODAPv3 release: converted value for silicate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for silicate_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:58 UTC for data product: GLODAPv3

GLODAPv3 release: converted value for phosphate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for phosphate_offset from
percent to factor: -999.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:44 UTC for data product: GLODAPv3

GLODAPv3 release: converted value for oxygen_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for oxygen_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:32 UTC for data product: GLODAPv3

GLODAPv3 release: converted value for nitrate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for nitrate_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:19 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated silicate update for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - silicate update of 35MF20010103[1-last] based on
silicate_offset: -888.0; inversion: NaN; inversion_full: NaN; preadjustment:
NaN; offsets_raw: NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post:
NaN; offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre:
NaN; trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-05 14:17:27 UTC for data product: GLODAPv3

35MF20010103[1-last] GLODAPv3 release

GLODAPv3 release: silicate autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-05 14:17:27 UTC for data product: GLODAPv3

GLODAPv3 release: temperature added as NEW adjustment parameter to 35MF20010103[1-last]

Automated addition of temperature as NEW parameter to 35MF20010103[1-last] based
on temperature_offset: -888.

Posted by nlange@geomar.de on 2026-08-05 14:17:14 UTC for data product: GLODAPv3

35MF20010103[1-last] GLODAPv3 release

Automated addition of temperature as NEW adjustment parameter in GLODAPv3 to
35MF20010103[1-last] - select parameter to view annotation with specific
details.

Posted by nlange@geomar.de on 2026-08-05 14:17:14 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated tco2 update for 35MF20010103

GLODAPv3 release: tco2 update of 35MF20010103 based on tco2_offset: -888.0;
inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw: NaN;
offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN; offsets_post_u:
NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN; trends_adj:
NaN.

Posted by nlange@geomar.de on 2026-08-04 17:12:14 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: tco2 autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 17:12:14 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated salinity update for 35MF20010103

GLODAPv3 release: salinity update of 35MF20010103 based on salinity_offset:
-888.0000; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:43 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: salinity autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 17:11:43 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated phosphate update for 35MF20010103

GLODAPv3 release: phosphate update of 35MF20010103 based on phosphate_offset:
-999.0; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:29 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: phosphate autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 17:11:29 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated oxygen update for 35MF20010103

GLODAPv3 release: oxygen update of 35MF20010103 based on oxygen_offset: -888.0;
inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw: NaN;
offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN; offsets_post_u:
NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN; trends_adj:
NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:16 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: oxygen autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 17:11:16 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated nitrate update for 35MF20010103

GLODAPv3 release: nitrate update of 35MF20010103 based on nitrate_offset:
-888.0; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:03 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: nitrate autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 17:11:03 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated alkalinity update for 35MF20010103

GLODAPv3 release: alkalinity update of 35MF20010103 based on alkalinity_offset:
-888.0; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 13:46:27 UTC for data product: GLODAPv3

35MF20010103 GLODAPv3 release

GLODAPv3 release: alkalinity autogenerated adjustment parameter update for
35MF20010103 - select parameter to view annotation with specific details.

Posted by nlange@geomar.de on 2026-08-04 13:46:27 UTC for data product: GLODAPv3

Autogenerated CTD salinity and CTD oxygen update

Automated update! This overwrites adjustment values (and flags) of CTDoxy and
CTDsal with the values from BOTsal and BOToxy for every cruise, unless CTDsal
(or CTDoxy) is not present or bad.
Salinity action ID:6; CTD salinity data good, setting CTD salinity offset and QC
flag to bottle values.
Oxygen action ID:5; CTD oxygen data good, setting CTD oxygen offset and QC flag
to bottle values.

Posted by svheuven@gmail.com on 2015-02-19 09:22:19 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - alkalinity

Automated update setting data quality flag from BAD to GOOD in order to retain
these non-QCed data in final product. SvH/GLODAPv2 / 2015-01-19)

Posted by svheuven@gmail.com on 2015-01-20 14:46:42 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/oxygen: update slope+intercept

autogenerated: BOToxy is compatible with unchanged CTDoxy

Posted by svheuven@gmail.com on 2014-12-18 16:52:45 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/salinity: update slope+intercept

autogenerated: BOTsal is compatible with CALIBRATED CTDsal

Posted by svheuven@gmail.com on 2014-12-18 16:52:45 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - oxygen

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - silicate

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain. I cannot solve
these 35MF cruises for Silicate, and by this stage will happily just accept
anything Clair suggested for them.

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - phosphate

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - nitrate

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : set to 1

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - alkalinity

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : set to -888

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - tCO2

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - salinity

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : make -0.005. Inversion
result is clear

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/oxygen: init slope+intercept

autogenerated: using BOToxy because bad fit of CTDoxy.

Posted by svheuven@gmail.com on 2014-02-25 17:02:15 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/salinity: init slope+intercept

autogenerated: using mean of BOTsal and UNCHANGED CTDsal

Posted by svheuven@gmail.com on 2014-02-25 17:02:15 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - oxygen

OISO6: only one deep profiles (at 56°S).
INTERNAL OISO CONSISTENCY:
6 cross overs were analyzed. The average of all cross overs is 1.007 (+/-0.029).
3 cross overs show no significant differences (<1%) and involve cruises that are
thought to have no offset in oxygen. When the offsets suggested for the other
cruises are taken into account the average of all cross overs is 0.996
(+/-0.004). This suggests that no adjustment would be required.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO3 shows a ratio of 1.006 (+/-0.006), which
supports the analysis above.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for oxygen.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:23:48 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - silicate

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is 1.025
(+/-0.046).
Only 2 cross overs found at 30°S show no significant differences (<2%) but they
involve cruises that are thought to have high silicate. When the suggested
offsets are taken into account the average of the 5 cross overs found at 30°S is
1.024 (+/-0.007). This suggests that a small adjustment could be required
(0.98).
At 56°S, however, when the suggested offsets as well as the suggested natural
variability are taken into account the average of the 6 cross overs is 1.001
(+/-0.003). This suggests that no adjustment would be required, but it is not
warranted since Antarctic deep waters are entitled to natural variability which
could mask the offset observed at 30°S.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO1 (30°S) shows a ratio of 1.031 (+/-0.019),
which is in good agreement with the analysis above (given that INDIGO1 is
thought to have slightly low silicate).
The cross over with the cruise INDIGO3 (56°S) shows a ratio of 0.938 (+/-0.007),
but INDIGO3 is thought to have high silicate values. When the suggested offset
is taken into account as well as the suggested natural variability, a good
agreement is found with the OISO analysis above (1.008).
CONCLUSION:
The different results obtained at 30°S and 56°S are probably due to natural
changes that would have operate in Antarctic deep waters as suggested by the
analysis of other parameters including salinity.
Based on this I suggest an adjustment of 0.98 for silicate.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:23:29 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - nitrate

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
10 cross overs were analyzed. The average of all cross overs is 0.994 (+/-0.52).
4 cross overs show no significant differences (<2%), and 3 of them involve
cruises that are thought to have no offset in nitrate. When the suggested
offsets for the other cruises are taken into account as well as the suggested
natural variability at 56°S, the average of all cross overs is 1.004 (+/-0.005).
This suggests that no adjustment would be required.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO1 (30°S) shows a ratio of 1.015 (+/-0.009)
and since INDIGO1 is thought to have no offset in nitrate, this supports the
result of the analysis above.
The cross over with the cruise INDIGO3 (56°S) shows a ratio of 1.049 (+/-0.013),
but INDIGO3 is thought to have low nitrate values. When the suggested offset is
taken into account as well as the suggested natural variability, a good
agreement is found with the analysis above (1.013).
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for nitrate.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:22:47 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - alkalinity

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
9 cross overs were analyzed. The average of all cross overs is -2.0 (+/-3.7)
umol/kg.
All cross overs but 2 show no significant differences (<5 umol/kg) and involve
cruises that are thought to have no offset in alkalinity. This suggests that no
adjustment would be required.
Note that cross overs found at 56°S show a large scatter around the mean (-3.0
+/-2.8 umol/kg), probably due to natural variability. And indeed, if a decrease
in alkalinity of 1 umol/kg/yr is assumed (as suggested in this study) the
scatter is reduced (-2.8 +/-1.2 umol/kg).
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show differences
of -17.0 (+/-1.3) umol/kg and -14.7 (+/-3.0) umol/kg, respectively, but INDIGO1
is known to have high alkalinity values by about 16 umol/kg and INDIGO3 would
have no offset but alkalinity might have decreased by about 14 umol/kg. If this
is taken into account the offsets with INDIGO cruises translate into no
significant differences, which supports the analysis above.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for alkalinity.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:55 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - tco2

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is +1.4 (+/-3.9)
umol/kg.
7 cross overs show no significant differences (<4 umol/kg) and involve cruises
that are thought to have no offset in TCO2. When the offsets suggested for the
other cruises are taken into account the average of all cross overs is +0.3
(+/-3.1) umol/kg. This suggests that no adjustment would be required.
It should be noted, however, that larger offsets are found at 30°S (+2.9 +/-1.3
umol/kg), compared to 56°S (-1.8 +/-2.3 umol/kg). This difference could be
attributed to natural variability as suggested by the analysis of salinity data.
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show offsets of
-8.4 (+/-4.6) umol/kg and -5.1 (+/-2.0) umol/kg, respectively. But since the
cruises INDIGO1 and INDIGO3 are known to have high TCO2 values by about 10
umol/kg and 6 umol/kg respectively (according to this study and GLODAP), the
differences translate into no significant offsets. This supports no adjustment.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for TCO2.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:35 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - salinity

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is +6.1 (+/-9.0)
ppm.
9 cross overs show significant differences (>5 ppm) and involve cruises that are
thought to have no significant offset in salinity. When the offsets suggested
for the other cruises are taken into account the average of all cross overs is
+7.6 (+/-2.5) ppm. It should be noted, however, that lower offsets are found at
56°S (mean of +6 +/-1 ppm) compared to 30°S (mean of +10 +/-1 ppm).
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show offsets of
+10 (+/-9) ppm and +3 (+/-3) ppm, respectively, which supports the analysis
above.
CONCLUSION:
Different results are obtained north or south of the Polar Front which should be
attributed to natural variability that is more likely to happen in Antarctic
deep waters than in Subtropical deep waters.
Based on this I suggest an adjustment of -10 ppm for salinity.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:01 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

View other postings and files re. this adjustment

ReadMe file(s) for this cruise

View 0 ReadMe(s) (Lists all ReadMes)

Files and Annotations for salinity

Files

Plot files re. Salinity
[+]:

Filename:	Comment:	Action…
35MF19981205_35MF20010103_salinity__Xover_SAL.png	[GLODAPv3 release: autogenerated from RC_Nico/salinity for: 35MF20010103[1-last]	View
35MF20000117_35MF20010103_salinity__Xover_SAL.png	[GLODAPv3 release: autogenerated from RC_Nico/salinity for: 35MF20010103[1-last]	View
35MF20000719_35MF20010103_salinity__Xover_SAL.png	[GLODAPv3 release: autogenerated from RC_Nico/salinity for: 35MF20010103[1-last]	View
35MF20010103_35MF20020104_salinity__Xover_SAL.png	[GLODAPv3 release: autogenerated from RC_Nico/salinity for: 35MF20010103[1-last]	View

Data files re. Salinity
[+]: - no files! -

View annotation(s) (filtered by salinity in subject)

GLODAPv3 release: autogenerated salinity update for 35MF20010103

GLODAPv3 release: salinity update of 35MF20010103 based on salinity_offset:
-888.0000; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:43 UTC for data product: GLODAPv3

Autogenerated CTD salinity and CTD oxygen update

Automated update! This overwrites adjustment values (and flags) of CTDoxy and
CTDsal with the values from BOTsal and BOToxy for every cruise, unless CTDsal
(or CTDoxy) is not present or bad.
Salinity action ID:6; CTD salinity data good, setting CTD salinity offset and QC
flag to bottle values.
Oxygen action ID:5; CTD oxygen data good, setting CTD oxygen offset and QC flag
to bottle values.

Posted by svheuven@gmail.com on 2015-02-19 09:22:19 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/salinity: update slope+intercept

autogenerated: BOTsal is compatible with CALIBRATED CTDsal

Posted by svheuven@gmail.com on 2014-12-18 16:52:45 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - salinity

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : make -0.005. Inversion
result is clear

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/salinity: init slope+intercept

autogenerated: using mean of BOTsal and UNCHANGED CTDsal

Posted by svheuven@gmail.com on 2014-02-25 17:02:15 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - salinity

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is +6.1 (+/-9.0)
ppm.
9 cross overs show significant differences (>5 ppm) and involve cruises that are
thought to have no significant offset in salinity. When the offsets suggested
for the other cruises are taken into account the average of all cross overs is
+7.6 (+/-2.5) ppm. It should be noted, however, that lower offsets are found at
56°S (mean of +6 +/-1 ppm) compared to 30°S (mean of +10 +/-1 ppm).
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show offsets of
+10 (+/-9) ppm and +3 (+/-3) ppm, respectively, which supports the analysis
above.
CONCLUSION:
Different results are obtained north or south of the Polar Front which should be
attributed to natural variability that is more likely to happen in Antarctic
deep waters than in Subtropical deep waters.
Based on this I suggest an adjustment of -10 ppm for salinity.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:01 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for ctd_salinity

Files

Plot files re. CTD-Sal. [+]
slope | intercept | action [ID]: - no files! -

Data files re. CTD-Sal. [+]
slope | intercept | action [ID]: - no files! -

View annotation(s) (filtered by ctd_salinity in subject)

Files and Annotations for tco2

Files

Plot files re. TCO₂
[+]:

Filename:	Comment:	Action…
35MF19981205_35MF20010103_tco2__Xover_DIC.png	[GLODAPv3 release: autogenerated from RC_Nico/tco2 for: 35MF20010103[1-last]	View
35MF20000117_35MF20010103_tco2__Xover_DIC.png	[GLODAPv3 release: autogenerated from RC_Nico/tco2 for: 35MF20010103[1-last]	View
35MF20000719_35MF20010103_tco2__Xover_DIC.png	[GLODAPv3 release: autogenerated from RC_Nico/tco2 for: 35MF20010103[1-last]	View
35MF20010103_35MF20020104_tco2__Xover_DIC.png	[GLODAPv3 release: autogenerated from RC_Nico/tco2 for: 35MF20010103[1-last]	View

Data files re. TCO₂
[+]: - no files! -

View annotation(s) (filtered by tco2 in subject)

GLODAPv3 release: autogenerated tco2 update for 35MF20010103

GLODAPv3 release: tco2 update of 35MF20010103 based on tco2_offset: -888.0;
inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw: NaN;
offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN; offsets_post_u:
NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN; trends_adj:
NaN.

Posted by nlange@geomar.de on 2026-08-04 17:12:14 UTC for data product: GLODAPv3

Autogenerated comment - tCO2

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - tco2

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is +1.4 (+/-3.9)
umol/kg.
7 cross overs show no significant differences (<4 umol/kg) and involve cruises
that are thought to have no offset in TCO2. When the offsets suggested for the
other cruises are taken into account the average of all cross overs is +0.3
(+/-3.1) umol/kg. This suggests that no adjustment would be required.
It should be noted, however, that larger offsets are found at 30°S (+2.9 +/-1.3
umol/kg), compared to 56°S (-1.8 +/-2.3 umol/kg). This difference could be
attributed to natural variability as suggested by the analysis of salinity data.
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show offsets of
-8.4 (+/-4.6) umol/kg and -5.1 (+/-2.0) umol/kg, respectively. But since the
cruises INDIGO1 and INDIGO3 are known to have high TCO2 values by about 10
umol/kg and 6 umol/kg respectively (according to this study and GLODAP), the
differences translate into no significant offsets. This supports no adjustment.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for TCO2.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:35 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for alkalinity

Files

Plot files re. Alkalinity
[+]:

Filename:	Comment:	Action…
35MF19981205_35MF20010103_alkalinity_Xover_ALK.png	[GLODAPv3 release: autogenerated from RC_Nico/alkalinity for: 35MF20010103[1-last]	View
35MF20000719_35MF20010103_alkalinity_Xover_ALK.png	[GLODAPv3 release: autogenerated from RC_Nico/alkalinity for: 35MF20010103[1-last]	View
35MF20010103_35MF20020104_alkalinity_Xover_ALK.png	[GLODAPv3 release: autogenerated from RC_Nico/alkalinity for: 35MF20010103[1-last]	View

Filename:

Comment:

Action…

35MF19981205_35MF20010103_alkalinity_Xover_ALK.png

[GLODAPv3 release: autogenerated from
RC_Nico/alkalinity for: 35MF20010103[1-last]

View

35MF20000719_35MF20010103_alkalinity_Xover_ALK.png

[GLODAPv3 release: autogenerated from
RC_Nico/alkalinity for: 35MF20010103[1-last]

View

35MF20010103_35MF20020104_alkalinity_Xover_ALK.png

[GLODAPv3 release: autogenerated from
RC_Nico/alkalinity for: 35MF20010103[1-last]

View

Data files re. Alkalinity
[+]: - no files! -

View annotation(s) (filtered by alkalinity in subject)

GLODAPv3 release: autogenerated alkalinity update for 35MF20010103

GLODAPv3 release: alkalinity update of 35MF20010103 based on alkalinity_offset:
-888.0; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 13:46:27 UTC for data product: GLODAPv3

Autogenerated comment - alkalinity

Automated update setting data quality flag from BAD to GOOD in order to retain
these non-QCed data in final product. SvH/GLODAPv2 / 2015-01-19)

Posted by svheuven@gmail.com on 2015-01-20 14:46:42 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - alkalinity

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : set to -888

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - alkalinity

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
9 cross overs were analyzed. The average of all cross overs is -2.0 (+/-3.7)
umol/kg.
All cross overs but 2 show no significant differences (<5 umol/kg) and involve
cruises that are thought to have no offset in alkalinity. This suggests that no
adjustment would be required.
Note that cross overs found at 56°S show a large scatter around the mean (-3.0
+/-2.8 umol/kg), probably due to natural variability. And indeed, if a decrease
in alkalinity of 1 umol/kg/yr is assumed (as suggested in this study) the
scatter is reduced (-2.8 +/-1.2 umol/kg).
OTHER CROSS OVERS:
The cross overs with cruises INDIGO1 (30°S) and INDIGO3 (56°S) show differences
of -17.0 (+/-1.3) umol/kg and -14.7 (+/-3.0) umol/kg, respectively, but INDIGO1
is known to have high alkalinity values by about 16 umol/kg and INDIGO3 would
have no offset but alkalinity might have decreased by about 14 umol/kg. If this
is taken into account the offsets with INDIGO cruises translate into no
significant differences, which supports the analysis above.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for alkalinity.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-08 23:53:55 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for nitrate

Files

Plot files re. Nitrate
[x]:

Filename:	Comment:	Action…
35MF19981205_35MF20010103_nitrate__Xover_NO3.png	[GLODAPv3 release: autogenerated from RC_Nico/nitrate for: 35MF20010103[1-last]	View
35MF20000117_35MF20010103_nitrate__Xover_NO3.png	[GLODAPv3 release: autogenerated from RC_Nico/nitrate for: 35MF20010103[1-last]	View
35MF20000719_35MF20010103_nitrate__Xover_NO3.png	[GLODAPv3 release: autogenerated from RC_Nico/nitrate for: 35MF20010103[1-last]	View
35MF20010103_35MF20020104_nitrate__Xover_NO3.png	[GLODAPv3 release: autogenerated from RC_Nico/nitrate for: 35MF20010103[1-last]	View

Data files re. Nitrate
[x]: - no files! -

View annotation(s) (filtered by nitrate in subject)

GLODAPv3 release: converted value for nitrate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for nitrate_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:19 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated nitrate update for 35MF20010103

GLODAPv3 release: nitrate update of 35MF20010103 based on nitrate_offset:
-888.0; inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw:
NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN;
offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN;
trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:03 UTC for data product: GLODAPv3

Autogenerated comment - nitrate

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : set to 1

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - nitrate

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
10 cross overs were analyzed. The average of all cross overs is 0.994 (+/-0.52).
4 cross overs show no significant differences (<2%), and 3 of them involve
cruises that are thought to have no offset in nitrate. When the suggested
offsets for the other cruises are taken into account as well as the suggested
natural variability at 56°S, the average of all cross overs is 1.004 (+/-0.005).
This suggests that no adjustment would be required.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO1 (30°S) shows a ratio of 1.015 (+/-0.009)
and since INDIGO1 is thought to have no offset in nitrate, this supports the
result of the analysis above.
The cross over with the cruise INDIGO3 (56°S) shows a ratio of 1.049 (+/-0.013),
but INDIGO3 is thought to have low nitrate values. When the suggested offset is
taken into account as well as the suggested natural variability, a good
agreement is found with the analysis above (1.013).
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for nitrate.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:22:47 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for phosphate

Files

Plot files re. Phosphate
[x]: - no files! -

Data files re. Phosphate
[x]: - no files! -

View annotation(s) (filtered by phosphate in subject)

Files and Annotations for silicate

Files

Plot files re. Silicate
[x]: - no files! -

Data files re. Silicate
[x]: - no files! -

View annotation(s) (filtered by silicate in subject)

GLODAPv3 release: converted value for silicate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for silicate_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:58 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated silicate update for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - silicate update of 35MF20010103[1-last] based on
silicate_offset: -888.0; inversion: NaN; inversion_full: NaN; preadjustment:
NaN; offsets_raw: NaN; offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post:
NaN; offsets_post_u: NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre:
NaN; trends_adj: NaN.

Posted by nlange@geomar.de on 2026-08-05 14:17:27 UTC for data product: GLODAPv3

Autogenerated comment - silicate

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain. I cannot solve
these 35MF cruises for Silicate, and by this stage will happily just accept
anything Clair suggested for them.

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - silicate

OISO6: two deep profiles (at 30°S and 56°S).
Note: these 2 stations are treated as different cross overs in the analysis
below.
INTERNAL OISO CONSISTENCY:
11 cross overs were analyzed. The average of all cross overs is 1.025
(+/-0.046).
Only 2 cross overs found at 30°S show no significant differences (<2%) but they
involve cruises that are thought to have high silicate. When the suggested
offsets are taken into account the average of the 5 cross overs found at 30°S is
1.024 (+/-0.007). This suggests that a small adjustment could be required
(0.98).
At 56°S, however, when the suggested offsets as well as the suggested natural
variability are taken into account the average of the 6 cross overs is 1.001
(+/-0.003). This suggests that no adjustment would be required, but it is not
warranted since Antarctic deep waters are entitled to natural variability which
could mask the offset observed at 30°S.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO1 (30°S) shows a ratio of 1.031 (+/-0.019),
which is in good agreement with the analysis above (given that INDIGO1 is
thought to have slightly low silicate).
The cross over with the cruise INDIGO3 (56°S) shows a ratio of 0.938 (+/-0.007),
but INDIGO3 is thought to have high silicate values. When the suggested offset
is taken into account as well as the suggested natural variability, a good
agreement is found with the OISO analysis above (1.008).
CONCLUSION:
The different results obtained at 30°S and 56°S are probably due to natural
changes that would have operate in Antarctic deep waters as suggested by the
analysis of other parameters including salinity.
Based on this I suggest an adjustment of 0.98 for silicate.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:23:29 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for oxygen

Files

Plot files re. Oxygen
[x]:

Filename:	Comment:	Action…
35MF19981205_35MF20010103_oxygen__Xover_O2.png	[GLODAPv3 release: autogenerated from RC_Nico/oxygen for: 35MF20010103[1-last]	View
35MF20000117_35MF20010103_oxygen__Xover_O2.png	[GLODAPv3 release: autogenerated from RC_Nico/oxygen for: 35MF20010103[1-last]	View
35MF20000719_35MF20010103_oxygen__Xover_O2.png	[GLODAPv3 release: autogenerated from RC_Nico/oxygen for: 35MF20010103[1-last]	View
35MF20010103_35MF20020104_oxygen__Xover_O2.png	[GLODAPv3 release: autogenerated from RC_Nico/oxygen for: 35MF20010103[1-last]	View

Data files re. Oxygen
[x]: - no files! -

View annotation(s) (filtered by oxygen in subject)

GLODAPv3 release: converted value for oxygen_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: CORRIGENDUM - converted value for oxygen_offset from percent
to factor: -888.0.

Posted by nlange@geomar.de on 2026-08-05 16:37:32 UTC for data product: GLODAPv3

GLODAPv3 release: autogenerated oxygen update for 35MF20010103

GLODAPv3 release: oxygen update of 35MF20010103 based on oxygen_offset: -888.0;
inversion: NaN; inversion_full: NaN; preadjustment: NaN; offsets_raw: NaN;
offsets_preadj: NaN; offsets_preadj_u: NaN; offsets_post: NaN; offsets_post_u:
NaN; offsets_post_rt: NaN; numberofxovers: NaN; trends_pre: NaN; trends_adj:
NaN.

Posted by nlange@geomar.de on 2026-08-04 17:11:16 UTC for data product: GLODAPv3

Autogenerated CTD salinity and CTD oxygen update

Automated update! This overwrites adjustment values (and flags) of CTDoxy and
CTDsal with the values from BOTsal and BOToxy for every cruise, unless CTDsal
(or CTDoxy) is not present or bad.
Salinity action ID:6; CTD salinity data good, setting CTD salinity offset and QC
flag to bottle values.
Oxygen action ID:5; CTD oxygen data good, setting CTD oxygen offset and QC flag
to bottle values.

Posted by svheuven@gmail.com on 2015-02-19 09:22:19 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/oxygen: update slope+intercept

autogenerated: BOToxy is compatible with unchanged CTDoxy

Posted by svheuven@gmail.com on 2014-12-18 16:52:45 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Autogenerated comment - oxygen

Auto-uploaded comment from GLODAPv2 assessment by Steven van Heuven (src:
GLODAPv2 Adjustment IND and PAC_SvH_20140611.xlsx): : maintain

Posted by svheuven@gmail.com on 2014-06-16 15:50:37 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103/oxygen: init slope+intercept

autogenerated: using BOToxy because bad fit of CTDoxy.

Posted by svheuven@gmail.com on 2014-02-25 17:02:15 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

35MF20010103 - oxygen

OISO6: only one deep profiles (at 56°S).
INTERNAL OISO CONSISTENCY:
6 cross overs were analyzed. The average of all cross overs is 1.007 (+/-0.029).
3 cross overs show no significant differences (<1%) and involve cruises that are
thought to have no offset in oxygen. When the offsets suggested for the other
cruises are taken into account the average of all cross overs is 0.996
(+/-0.004). This suggests that no adjustment would be required.
OTHER CROSS OVERS:
The cross over with the cruise INDIGO3 shows a ratio of 1.006 (+/-0.006), which
supports the analysis above.
CONCLUSION:
Based on the regional analyses above I suggest no adjustment for oxygen.
___________________
Paris, August 2008
Claire Lo Monaco

Posted by claire.lomonaco@locean.upmc.fr on 2008-10-21 13:23:48 UTC for data product: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Hide annotations

Files and Annotations for ctd_oxygen

Files

Plot files re. CTD-Oxyg. [x]
slope | intercept | action [ID]: - no files! -

Data files re. CTD-Oxyg. [x]
slope | intercept | action [ID]: - no files! -

View annotation(s) (filtered by ctd_oxygen in subject)

Files and Annotations for temperature

Files

Plot files re. Temp.
[+]: - no files! -

Data files re. Temp.
[+]: - no files! -

View annotation(s) (filtered by temperature in subject)

Files and Annotations for cfc12

Files

Plot files re. CFC12
[x]: - no files! -

Data files re. CFC12
[x]: - no files! -

View annotation(s) (filtered by cfc12 in subject)

Files and Annotations for cfc11

Files

Plot files re. CFC11
[x]: - no files! -

Data files re. CFC11
[x]: - no files! -

View annotation(s) (filtered by cfc11 in subject)

Files and Annotations for cfc113

Files

Plot files re. CFC113
[x]: - no files! -

Data files re. CFC113
[x]: - no files! -

View annotation(s) (filtered by cfc113 in subject)

Files and Annotations for ccl4

Files

Plot files re. CCl4
[x]: - no files! -

Data files re. CCl4
[x]: - no files! -

View annotation(s) (filtered by ccl4 in subject)

Files and Annotations for c13

Files

Plot files re. C13
[+]: - no files! -

Data files re. C13
[+]: - no files! -

View annotation(s) (filtered by c13 in subject)

Files and Annotations for sf6

Files

Plot files re. SF6
[x]: - no files! -

Data files re. SF6
[x]: - no files! -

View annotation(s) (filtered by sf6 in subject)

Dataproduct: GLODAPv3 :: Adjustments

Cruise: 35MF20010103 (dataset:CARINA) Data product: GLODAPv3 Predecessor: CARINA, GLODAPv2, v2.2019, v2.2020, v2.2021, v2.2022, v2.2023

Please wait while loading list of related files…

GLODAPv3 release: converted value for silicate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: converted value for phosphate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: converted value for oxygen_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: converted value for nitrate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: autogenerated silicate update for 35MF20010103[1-last]

35MF20010103[1-last] GLODAPv3 release

GLODAPv3 release: temperature added as NEW adjustment parameter to 35MF20010103[1-last]

35MF20010103[1-last] GLODAPv3 release

GLODAPv3 release: autogenerated tco2 update for 35MF20010103

35MF20010103 GLODAPv3 release

GLODAPv3 release: autogenerated salinity update for 35MF20010103

35MF20010103 GLODAPv3 release

GLODAPv3 release: autogenerated phosphate update for 35MF20010103

35MF20010103 GLODAPv3 release

GLODAPv3 release: autogenerated oxygen update for 35MF20010103

35MF20010103 GLODAPv3 release

GLODAPv3 release: autogenerated nitrate update for 35MF20010103

35MF20010103 GLODAPv3 release

GLODAPv3 release: autogenerated alkalinity update for 35MF20010103

35MF20010103 GLODAPv3 release

Autogenerated CTD salinity and CTD oxygen update

Autogenerated comment - alkalinity

35MF20010103/oxygen: update slope+intercept

35MF20010103/salinity: update slope+intercept

Autogenerated comment - oxygen

Autogenerated comment - silicate

Autogenerated comment - phosphate

Autogenerated comment - nitrate

Autogenerated comment - alkalinity

Autogenerated comment - tCO2

Autogenerated comment - salinity

35MF20010103/oxygen: init slope+intercept

35MF20010103/salinity: init slope+intercept

35MF20010103 - oxygen

35MF20010103 - silicate

35MF20010103 - nitrate

35MF20010103 - alkalinity

35MF20010103 - tco2

35MF20010103 - salinity

GLODAPv3 release: autogenerated salinity update for 35MF20010103

Autogenerated CTD salinity and CTD oxygen update

35MF20010103/salinity: update slope+intercept

Autogenerated comment - salinity

35MF20010103/salinity: init slope+intercept

35MF20010103 - salinity

Autogenerated CTD salinity and CTD oxygen update

GLODAPv3 release: autogenerated tco2 update for 35MF20010103

Autogenerated comment - tCO2

35MF20010103 - tco2

GLODAPv3 release: autogenerated alkalinity update for 35MF20010103

Autogenerated comment - alkalinity

Autogenerated comment - alkalinity

35MF20010103 - alkalinity

GLODAPv3 release: converted value for nitrate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: autogenerated nitrate update for 35MF20010103

Autogenerated comment - nitrate

35MF20010103 - nitrate

GLODAPv3 release: converted value for phosphate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: autogenerated phosphate update for 35MF20010103

Autogenerated comment - phosphate

GLODAPv3 release: converted value for silicate_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: autogenerated silicate update for 35MF20010103[1-last]

Autogenerated comment - silicate

35MF20010103 - silicate

GLODAPv3 release: converted value for oxygen_offset from percent to factor for 35MF20010103[1-last]

GLODAPv3 release: autogenerated oxygen update for 35MF20010103

Autogenerated CTD salinity and CTD oxygen update

35MF20010103/oxygen: update slope+intercept

Autogenerated comment - oxygen

35MF20010103/oxygen: init slope+intercept

35MF20010103 - oxygen

Autogenerated CTD salinity and CTD oxygen update

GLODAPv3 release: temperature added as NEW adjustment parameter to 35MF20010103[1-last]